NWI METAL DETECTORS

Fisher Metal Detectors         Tesoro Metal Detectors        White's Metal Detectors        Minelab Metal Detectors

                                                                               
 

   

MINELAB

 


METAL DETECTING TERMINOLOGY CLICK BELOW

_Metal_Detecting_Terminology.pdf


NEW MINELAB E-TRAC

Minelab's most technologically advanced detector sets a new benchmark for the industry!E-Trac

E-Trac is Minelab's most technologically advanced detector, incorporating unique Full Band Spectrum (FBS) Technology. Its sleek, sturdy design, innovative control panel, intuitive menus, clear LCD, robust lightweight coil and comprehensive targeting options set E-Trac apart from any other detector available today.

Minelab has taken a further ground breaking step by incorporating a USB interface, which will allow you to download and upload E-Trac settings, User Modes and Discrimination Patterns using your own Personal Computer (PC).

E-Trac will locate valuable metal objects in a variety of mineralised ground conditions such as extremely salty soils, sea water, wet beach sand and highly magnetic ground conditions. By using the E-Trac you can become one of the many successful detectorists who combine their passion for the outdoors with the excitement of discovering valuable coins, relics, gold and jewellery on a regular basis.


E-TRAC Technology

E-Trac TechnologyE-Trac delivers Full Band Spectrum (FBS) with Simultaneous Frequencies ranging from 1.5kHz - 100kHz through its powerful microprocessor. The frequency range means that the signal received from the detector coil is analysed from a wide range of responses. This allows E-Trac's advanced signal processing to rate detected objects according to their ferrous and conductivity (FE-CO) characteristics and analyse more target information so that the target identification (ID) is more accurate.

Minelab's Smartfind™ is a unique two-dimensional scale of discrimination. Smartfind™ graphically represents both the ferrous and conductivity properties on the same display. This combined with E-Trac's target Discrimination ability eliminates signals from undesired targets and accepts signals from desired targets. E-Trac's technology means:

- Greater detecting depth
- High sensitivity over a wide range of targets
- Less interference from electromagnetic sources
- More accurate identification of target characteristics

E-TRAC XchangeE-Trac Xchange

E-Trac Xchange allows you to download and upload detector settings and Discrimination Patterns via USB to your Personal Computer. This advanced feature is designed to allow you to quickly configure the E-Trac to particular detecting environments and preferred targets.

You can always share your experiences and settings with other detectorists. The installation CD and Xchange User Guide supplied with your E-Trac ensure you can get started straight away.

You can build a resource library charting your success with your E-Trac. Download and store your valuable Settings, User Modes and Patterns for your favourite sites and upload them as required. There's no limit to the number you can store on your PC so make the most of your E-Trac and never worry about losing your successful settings again!

Features

  • E-Trac Xchange USB functionality - create, download and upload your E-Trac Settings and Discrimination Patterns for your favourite sites; save to your PC or XChange them with others by email.
  • Ultra-lightweight waterproof 11" Double D Waterproof Coil, versatile with sharp, accurate pinpointing and depth!
  • QuickMask™ with independent Ferrous and Conductivity rejection level adjust - a fast and simple way to edit Patterns
  • Smartfind™ offers Minelab's proven unique discrimination and dual coordinate target profiling.
  • Discrimination Scale with radical realignment improves the target ID and recovery rate of good targets at depth
  • Sensitivity functionality with expanded Auto, Manual and "Suggested" settings
  • Refined Threshold adjustment level on a 1-50 scale - greater precision to suit your requirements
  • Pinpoint with audio and visual indicators on 2 modes makes target size and identification more accurate than ever
  • Four pre-programmed Minelab User Modes with specific Settings and Patterns suited to Coins; High Trash; Beach and Relics.
  • Four User Mode slots - personalise your Modes to suit your specific detecting target preferences and environment.
  • Ground Setting options of Neutral and Difficult adapt easily to benign or the most challenging operating conditions with these settings.
  • Trash Density - High ensures you experience fewer false signals in high trash environments, Low is perfect for cleaner sites.
  • User-centered Keypad and Menu Interface Design - enhanced usability with intuitive icons and logical menu sequences that are fast and so easy to use!
  • Clear resolution Visual Display Panel 72mm x 48mm - designed for optimum visibility in all light conditions
  • Ergonomic, perfectly balanced Handle Assembly ensures longer periods of detecting without fatigue!
  • Additional Expert Features and Preferences allow you to customise your E-Trac to suit your needs.    

 

 

MSRP  $1,895.00

 NWI PRICE

$1498.97

CALL or EMAIL

phone 219-766-2879

email  nwidetectors@yahoo.com

FREE  SHIPPING

 


NEW MINELAB SAFARI

Hidden treasures are now within reach with Safari!Safari

Powered by Minelab's FBS multiple frequency technology, Safari combines deep, sensitive and accurate detecting for anyone demanding both simplicity AND performance!

Safari uses advanced digital filtering to eliminate the influence of ground signals, automatically. Experience easy, seamless detecting whatever the field conditions!

With its High Trash Density setting, Target Ids and audio tones are updated when sweeping over closely spaced targets FAST! This improves the recovery of deeply buried high conductivity targets in a trashy environment and allows you to more accurately identify the type of target found.

Accurate and easy to use, press the pinpoint button and watch the Safari zone-in on the precise location of that precious target.

With four pre-programmed Detect modes, you can choose from Coin; Coin & Jewellery; Relic or All Metal. Each individual mode contains the optimum settings for identifying the characteristics of your preferred targets, allowing you to maximise your time in the field.

Features

  • Ultra-lightweight 11" Double D waterproof coil combines high performance, great depth and sharp pinpointing.
  • Four pre-programmed Detection Modes - Coin; Coin/Jewellery; Relic and All Metal.
  • Four Programmable user modes
  • Linear -10 to +40 discrimination scale. Accept/Reject functionality.
  • Fully Automatic and Manual Sensitivity control options.
  • Pinpoint with audio and visual indicators for accurate detection.
  • Trash Density - High ensures fewer false signals experienced in typical coin and relic environments, Low is ideal for clean sites.
  • Threshold adjustment level on a 0-40 scale.
  • Target Volume Adjust - adapts target signal volume to suit user preference.
  • Noise Cancel - automatically selects the quietest, most stable channel for detecting.
  • Menu Interface - Intuitive menu structure for fast and easy access and adjustment. Clear view target depth gauge; Target ID number; Target Icon (in Coin and Coin/Jewellery Modes); Mode indicators and Graphic Identification Bar showing active discrimination pattern.
  • LCD Screen, 64 x 128 pixel with adjustable contrast settings.
  • Long lower shaft as standard allowing extra extension for user comfort.
  • Robust, well balanced design for comfortable detecting over longer periods.

Specs
Length Adjustable from 43" (1100 mm) to 54" (1370 mm)
Shipping Weight 6 lbs (2750g) excluding batteries
Detector Weight 3.6 lbs (1650g) excluding batteries
Coil 11" lightweight, waterproof, Double D
Audio Output Internal speaker or headphones
Headphone Output ¼" (6.3mm) stereo jack
Visual Display 64 x 128 pixel liquid crystal display (LCD)
Transmission Full Band Spectrum (FBS) Simultaneous multiple frequency transmission ranging from 1.5kHz to 100kHz
Ground Rejection Ground Compensation - advanced digital filtering
Discrimination Linear (-10 to +40 discrimination options)
Custom Select Discrimination Yes (-10 to +40)
Detect Modes (Preset) 4 (Coin; Coin/Jewellery; Relic; All Metal)
Detect Modes (Personal) 4 (Programmable/Save)
Auto Noise Cancel (Scanning) Yes
Pinpoint Non-motion with audio and visual indicators
Sensitivity Adjustment Fully Automatic/Manual (0-20)
Threshold Adjustable (0-40)
Target Volume Adjust Adjustable (0-20)
Trash Density High/Low
Batteries 12V Alkaline Pack (8 x 1.5 AA - batteries not included)
Patents US 4890064; US 5537041; US 5506506
Optional Accessories
Coils 8" FBS Coil with Lower Shaft, 8" and 11" Skidplates
Battery 1600/1800mA/H NiMH Battery Pack; 'AA' Housing Battery Pack
Charger 12V Car Charger
Other Carbon Fibre Lower Shaft, Tall Man Lower Shaft
 

 

MSRP $1295.00

 NWI PRICE

$998.95

CALL or EMAIL

phone 219-766-2879

email  nwidetectors@yahoo.com

 

Free Shipping

 

 

 


Minelab Explorer SE Pro


28 Frequencies Bombarding the Ground with Signals Ranging from 1.5 kHz to 100kHz

SE Pro

Minelab Explorer SE Pro Metal Detector- This third Generation Minelab Explorer surpasses anything you've seen for depth, sensitivity and superior discrimination!

The Full Band Spectrum (FBS) circuit automatically transmits multiple frequencies simultaneously. The increased frequency range means that the signal received from the detector coil is analyzed from a wide range of responses. This allow the Explorer SE to analyze more target information so that the Target Identification (ID) is more accurate.

Ground balancing is automatic with Minelab's advanced digital filtering. Whatever field conditions you encounter, from dry clay to wet black sand or rich loam, the Minelab Explorer SE will find what you are looking for. Minelab's unique FBS technology means deep , sensitive, accurate detecting.


Digital Technology - Simple - Powerful -Fast

Minelab Explorer SE Pro Features - What's New:

  • New lightweight, ultra-tough, waterproof 11" DD coil
  • New Faster and More Powerful Microprocessor with lower power consumption makes the Explorer SE more responsive. Spend more time detecting less time programming and recharging.

  • New Menu structure giving easier access to key functions makes the Minelab Explorer SE programming a breeze. Fast learning curve; intuitive, easy to learn user interface.

  • New Audio Modulated Pinpoint mode making target size and depth identification more reliable. Save valuable time recovering targets.

  • Simplified Iron Mask coordinates 0-31 with full ferrous discrimination capability. Easy correlation of iron mask settings with digital readout values; more user friendly functions; simplifies use of iron mask; makes better use of Iron Mask Function.

  • New Audio Target Settings with New Pitch Hold mode for picking up even the faintest of target signals. Improved recovery rate for smallest or deepest good targets.

  • New Quickstart settings make the learning curve on the Minelab Explorer SE a more rewarding one.

  • New Finer Threshold and volume adjust controls. Fine tune Threshold and Volume to perfectly match operation conditions. More accurate and comfortable settings.

  • Improved Threshold stability in noisy/trashy environment. Less false signals; covers more ground faster.

  • Larger Target Coordinates in Digital Screen and Improved Menu Fonts. Easy to read user interface.

  • Improved weight and balance with new lightweight waterproof coil; Comfortably detect for longer periods of time without fatigue.

Minelab Explorer SE Pro Metal Detector Features:

  • FBS Frequencies (1.5 - 100 kHz)
  • 8 AA Batteries (Alkaline)
  • Automatic Ground Tracking
  • 2 Year Warranty (1 Year Search Coil)

Explorer SE Pro Features

Transmission Technology Full Band Spectrum (FBS) 28 Simultaneous Frequencies ranging from 1.5kHz - 100 kHz
Number of Frequencies 28 Simultaneous Frequencies
Microprocessor New technology processor - faster and more powerful
Software 3rd Generation Software - improved user interface
Ground Balance Modes Auto Ground Compensation - Advanced Digital Filtering
Target Identification 2 Dimensional Smartfind™ Size / Conductivity and Ferrous characteristics
Audio Tone Identification Constant to Multi-tone; customizable Conductivity / Ferrous
Audio Tone Settings 3 Settings: Long, Smooth, Pitch Hold
Discrimination 2 Dimensional Smartfind™ Discrimination
Iron Mask Simplified Iron Mask coordinates 0-31 with full ferrous discrimination capability
Depth Indicator Yes; Now also updates in pinpoint mode
Sensitivity Adjustment 2 Settings: Semi-Automatic & Manual 1-32
Noise Cancel Automatic & Manual
Pinpoint Non-motion modulated audio for improved target size and depth identification
Low Battery Audio Alarm Yes
Batteries 1600 mAh NiMH or Alkaline batteries
Coil New lightweight, waterproof ultra-light - ultra-tough 11" DD coil
Visual Display 64x128 pixel LCD panel with improved graphics
Headphone Input 0.25 inch Stereo Jack
Threshold Finer adjust level; improved stability in high-trash
Recovery Speed Selectable (Fast & Deep)
Patents US 4890064; US 5537041; US 5506506
Optional Accessories
Coils 8" FBS Coil
Battery 1800mA/H NiMH Battery Pack; 'AA' Housing Battery Pack
Charger 12V Car Charger

MSRP  $1,495.00

 NWI PRICE

$1298.97

CALL or EMAIL

phone 219-766-2879

email  nwidetectors@yahoo.com


GT

Minelab Sovereign GT Metal Detector

The New Sovereign GT is packed with features including 17 frequencies, automatic Ground Tracking, Iron Mask (on/off), manual & automatic sensitivity, 2-band Noise Cancel and much more. The on-board computer chip handles all the work so you can concentrate on what you want - more good targets.

The Tornado TM Coil system is lightweight, ultra tough, waterproof and non-buoyant. It is ideal for anywhere you want to use it. The Tornado coil has its own on-board circuitry adding power and depth to this outstanding detector. Whatever you're looking for, Minelab's Sovereign GT has the penetrating power and versatility you need. Discrimination circuitry lets you eliminate signals from unwanted trash, while the Iron Mask enables you to detect valuable targets lying close to ferrous junk.

The Sovereign GT discriminates between good targets and unwanted trash with astonishing depth and can be use from the park or building site to the sandy beach or the gold fields.

Minelab's BBS Technology automatically transmits 17 separate frequencies over a range from 1.5khz to 25khz. This means you have more depth, greater sensitivity and more accurate discrimination.

Minelab Sovereign GT Metal Detector Features

  • 17 Frequencies (1.5 - 25.5 kHz)
  • 8 AA Batteries (Alkaline)
  • Automatic "ACCU-TRAK" Ground Tracking

FEATURES
Length Maximum 55in (1400mm)
  Minimum  38in (965mm)
Weight Control Box* 20.3oz (568gms)
  Tornado 1000 Slimline Coil 23oz (654gms)
Configuration  2 piece shaft and optional Hip mount
Technology  Broad Band Spectrum (BBS)
Transmit Frequency  17 Frequencies (1.5, 3, 4.5....25.5 kHz)
Ground Balance  "ACCU-TRAK" Automatic Ground Tracking
Battery System Alkaline 8 x 1.5V (AA) OR
NiMH battery pack (12v; 1000mAH)*
Mains Charger* 110v(USA); 230v(EU); 240v(AUS)
Vehicle Charger* 12v Cigarette Lighter plug
Digital Meter  (Accessory in some countries)
Audio Loudspeaker & 1/4" headphone jack
Aluminum with Neoprene Cover and Strap
Controls  
On/Off Volume  1 turn knob
Sensitivity  1 turn knob
Threshold  1 turn knob
Discriminate Level Adjust  1 turn knob
All Metals/Discriminate with Iron Mask on/Discriminate with Iron Mask off 3 pos. switch
Notch Filter  1 turn knob
Threshold / Silent Search 2 pos. switch
Ground Track / Fixed / Pin Point 3 pos. switch
Noise Cancel  2 pos. switch
Accessories  
Target ID Meter* Digital
Mains Charger 110V (USA), 230V (EU), 240V (AUS)
Tornado 800 Coil  8" DD; Waterproof
Tornado 1000 Coil  10" DD; Waterproof
NiMH Rechargeable Battery  12V, 1000mAh
Alkaline Battery Pack 8 x 1.5V (AA)
Car Charger  12V, Cigarette lighter plug
Hip Mount Bag  Durable cordura with window and shoulder strap
Meter Bag  Durable cordura with window
Carry Bag Protective and durable transport bag
Headphones  32 ohms
Warranty  
Control Box  2 years
Coil 1 year

MSRP  $995.00

NWI PRICE

$798.95

Includes  10" Search Coil, Coil Scuff Cover, Operators Manual, Headphones, NiMH Batteries, House Battery Charger, Carry Bag, and Shipping in Continental US


MINELAB EXCALIBUR II

Excalibur II

The World’s Best Water Detector!

Minelab’s unique Broad Band Spectrum (BBS) technology, combined with superior ground rejecting technology, makes the Excalibur II the ideal underwater machine. The unique design of the Minelab Excalibur II allows you to use it as effectively in or out of the water - this amphibious machine can move seamlessly from land, beach and wet sand conditions to underwater depths of up to 200ft (66m).

Thanks to a unique method of ground cancelling never again will you get false signals from detecting in salt water. Enjoy the simple yet effective discrimination and be surprised at the sensitivity and depth you uncover targets from.

Whether you are a long time diver or a casual beachcomber the Excalibur II is unbeatable for working the beach, wading in the shallows or diving a wreck at 200 feet for treasures.

Features: 

  • BBS 17 frequency technology (1.5kHz – 25.5kHz). 
  • High Visibility (Hi-Vis) fluorescent bodywork. 
  • Slimline coil (8” or 10” option) for reduced weight and improved balance. 
  • NiMH Rechargeable battery pack for operation up to 12 hours. 
  • Hi-Vis Skid plate. 
  • Side-mount shaft for shallow and surf-wading (available as an optional accessory).

 

Specification

Image
Product
Application Coin, Relic, Jewellery, Beach & Dive
Technology BBS
Frequency/Transmission 17 frequencies: 1.5, 3, 4.5,...25.5kHz)
Coil (standard) Choice of 8" or 10" round Double-D hardwired coil.
Audio Output Headphones (hardwired).
Headphones Supplied Koss 8 ohm headphones (hardwired).
Visual Display -
Backlight -
USB Connectivity -
Memory -
Depth Indication -
Detect Modes Discriminate or All-Metal (Pinpoint).
Discrimination Variable Discrimination (adjustable turn control) & All Metal (Pinpoint).
Timings -
Audio tone -
Audio Type -
Ground Balance Automatic ground rejection.
Ground Balance Type -
Trash Density -
Pinpoint Pinpoint mode.
Sensitivity Adjust Auto & manual (adjustable turn control).
Tune / Noise Cancel -
Threshold Adjustable turn contol.
Target Volume Adjust Adjustable turn control.
Battery NiMH battery pack 13V 1000 mAh (14-19 hours). Supplied with mains charger, alkaline battery optional accessory.
Low battery alert Audio alert.
Length Standard shaft 1140mm - 1220mm (45" - 48"); Dive shaft 820mm - 910mm (32" - 36").
Weight 8" Coil 2.1kg (4.6lbs) or 10" coil 2.3kg (5.1lbs) (inc NiMH battery).
Warranty 1 year control box & coil.

 

LIST PRICE  $1350.00

NWI PRICE

$1198.97


 

MINELAB X-TERRA 705

The X-Terra 705 offers the ultimate detecting experience. An "All-Purpose" detector capable of "all types" of detecting from Coin & Treasure, Relic, Beach to Gold Prospecting, the X-Terra 705 delivers optimal performance across diverse detecting conditions with ease. Performance and features driven, the versatility of the X-Terra 705 makes it without question, the leading product in its category. X-Terra 705

  • Compatible with LF (3kHz), MF (7kHz) and HF (18.75kHz) waterproof coils. All 7 X-Terra accessory coils can be used on the 705.
  • Automatic/Manual Ground Balancing, Tracking and now with Tracking Ground Balance Offset adjustment - Allows a performance advantage in certain areas such as wet/dry sand transition and hot rock locations, by setting the balance slightly positive or negative.
  • Coin & Treasure and Gold Prospecting Modes. You get a Gold detector plus Coin, Treasure & Relic detector in one!
  • 4 preset detecting patterns, that can also be customised, plus All-Metal mode.
  • Iron Mask feature - designed for Prospecting Mode.
  • Choice of 1,2,3 or 4 Tone ID's plus Multi-tone Target ID (28) response options.
  • Threshold tone for more accurate target ID interpretation.
  • 2 Pinpoint Modes; Auto and Sizing - with the new Sizing feature, the user gets valuable information on target characteristics including shape and size. Variable tone and graphical indicator.
  • Noise Cancel options Automatic/Manual (5 position).
  • Target ID stability - precise, solid responsiveness in high-trash areas.
  • Accurate Multi-Segment Discrimination Notching (28 segments).
  • Positive transflective LCD display featuring a backlight for better screen visibility in dim light conditions.
  • Depth indicators, update continuously, even in Pinpoint mode.
  • Low battery audio & visual warnings.
  • Runs on only 4 x AA batteries.
  • New look black shaft system.
  • Ultra lightweight, balanced design (only 1.3kgs).
  • New 3 year Warranty as standard.

 

VFLEX Technology

Powered by VLEX high precision technology the X-Terra Series provides dependable performance (high sensitivity, stability, repeatability) and improved immunity to tough environmental conditions. Inspired by the success of this revolutionary and innovative technology, Minelab presents the next generation in the X-Terra Series; X-Terra 305, 505 and 705.

The X-Terra Series uses state of the art digital and mixed signal components to enhance standard single frequency technology. The advantage of this VFLEX technology is that it provides dependable performance and improved immunity to outside interference by utilizing digital signal processing with highly calibrated analog circuits. VFLEX technology has the added advantage of changing the frequency of the detector by simply changing the coil being used.

With this New Generation X-Terra Series, Minelab once again delivers on its commitment to provide customers with exceptional performance, value AND results. The X-Terra 305, 505 and 705 are each lightweight, well-balanced, easy-to-use, and capable of accurate, responsive and rewarding detecting.

With increased coil versatility, improved settings and new features across the Series there is more value than ever for the customer. From beginners level, through to the more experienced user, the X-Terra Series has something for everyone.

 


 

 

 

 

MSRP  $950.00

 NWI PRICE

$698.95

CALL 219-766-2879

EMAIL  nwidetectors@yahoo.com


MINELAB X-TERRA 505

Advanced capability, great depth, excellent discrimination, the X-Terra 505 is the ideal all-round choice to take you to the next level of expertise and performance. Equally at home on land or at the beach, the X-Terra 505 now has full frequency capability and can adapt easily to coin & treasure and relic hunting. X-Terra 505

  • Compatible with LF (3kHz) waterproof coils as well as MF (7kHz) and HF (18.75kHz). The LF coil option is ideal for hunting large, deep targets. All 7 X-Terra accessory coils can now be used on the 505.
  • Increased Ground Balance capability, range now (0-50), allowing user to adjust to ground mineralization.
  • Coin & Treasure Detect Mode.
  • Extra detecting pattern - Now features 3 preset detecting patterns, that can also be customised, plus All Metal mode.
  • Larger discrimination range...allows for finer discrimination of high conductive targets.
  • Choice of 1,2,3 or 4 Tone ID's plus Multi-tone Target ID (19) response options.
  • Now has threshold adjustment, with a range of -5 to 25 allowing the user to set threshold to levels where slight variations from either very small shallow, or very large deep, targets can be noticed.
  • Increased Noise Cancel range, now 5 manual settings, allowing greater choice of detecting channel.
  • Accurate Multi-Segment Discrimination Notching (19 segments).
  • Fast recovery Pin-Point with variable tone and graphical indicator.
  • Increased Target Volume Adjust range, now (0-30), allowing better target response.
  • Depth indicator, updates continuously, even in Pinpoint mode.
  • Low battery audio & visual warnings.X-Terra 505 cbox
  • Positive reflective LCD display.
  • Runs on only 4 x AA batteries.
  • Ultra lightweight, balanced design (only 1.3kgs).
  • New 3 year Warranty as standard.

 

VFLEX Technology

Powered by VLEX high precision technology the X-Terra Series provides dependable performance (high sensitivity, stability, repeatability) and improved immunity to tough environmental conditions. Inspired by the success of this revolutionary and innovative technology, Minelab presents the next generation in the X-Terra Series; X-Terra 305, 505 and 705.

The X-Terra Series uses state of the art digital and mixed signal components to enhance standard single frequency technology. The advantage of this VFLEX technology is that it provides dependable performance and improved immunity to outside interference by utilizing digital signal processing with highly calibrated analog circuits. VFLEX technology has the added advantage of changing the frequency of the detector by simply changing the coil being used.

With this New Generation X-Terra Series, Minelab once again delivers on its commitment to provide customers with exceptional performance, value AND results. The X-Terra 305, 505 and 705 are each lightweight, well-balanced, easy-to-use, and capable of accurate, responsive and rewarding detecting.

With increased coil versatility, improved settings and new features across the Series there is more value than ever for the customer. From beginners level, through to the more experienced user, the X-Terra Series has something for everyone.

 

 

 

 

 

MSRP  $695.00

 NWI PRICE

$549.95

CALL or EMAIL

call 219-766-2879

email nwidetectors@yahoo.com


MINELAB X-TERRA 305


 

The high performance detector with all of the essential functionality you need!
This is a no nonsense detector! The 305 is now packed with new features, functionality and enhanced setting options. This detector delivers results, value and more....in fact some might think that we made it too good!!! When value for money really matters, then the X-Terra 305 is best in class!X-Terra 305

  • Compatible with MF (7kHz) and HF (18.75kHz) waterproof coils - this means that the X-Terra 305 now has 6 accessory coil options.
  • Accurate Ground Balance capability with manual adjustment of 0-20, allows the user to adjust to ground mineralization easily.
  • Coin & Treasure Detect Mode
  • 2 preset patterns, that can also be customised, plus All-Metal mode.
  • Choice of 1,2 or 3 tone ID's plus multi-tone Target ID (12) response. This allows greater flexibility in deciding how target signals are represented.
  • Threshold adjustment, with a range of -5 to 25 allowing the user to set threshold to levels where slight variations from either very small shallow, or very large deep, targets can be noticed.
  • Noise Cancel function with 3 manual settings allowing the user to pick the quietest channel for detecting.
  • Accurate Multi-Segment Discrimination Notching (12 segments).
  • Rapid recovery Pin-Point with variable tone and graphical indicator.
  • Target Volume adjust (0-10) allowing you to get more definitive audio information on each Target.
  • Depth indicator, updates continuously, even in Pinpoint mode.X-Terra 305 cbox
  • Low battery audio & visual warnings.
  • Positive reflective LCD display.
  • Runs on only 4 x AA batteries.
  • Ultra lightweight, balanced design (only 1.3kgs).
  • New 3 year Warranty as standard.

 

VFLEX Technology

Powered by VLEX high precision technology the X-Terra Series provides dependable performance (high sensitivity, stability, repeatability) and improved immunity to tough environmental conditions. Inspired by the success of this revolutionary and innovative technology, Minelab presents the next generation in the X-Terra Series; X-Terra 305, 505 and 705.

The X-Terra Series uses state of the art digital and mixed signal components to enhance standard single frequency technology. The advantage of this VFLEX technology is that it provides dependable performance and improved immunity to outside interference by utilizing digital signal processing with highly calibrated analog circuits. VFLEX technology has the added advantage of changing the frequency of the detector by simply changing the coil being used.

With this New Generation X-Terra Series, Minelab once again delivers on its commitment to provide customers with exceptional performance, value AND results. The X-Terra 305, 505 and 705 are each lightweight, well-balanced, easy-to-use, and capable of accurate, responsive and rewarding detecting.

With increased coil versatility, improved settings and new features across the Series there is more value than ever for the customer. From beginners level, through to the more experienced user, the X-Terra Series has something for everyone.

msrp $495.00

NWI PRICE

$398.95


CONTROL BOX COVER

MINELAB FBS CONTROL BOX COVER

MSRP $14.95

NWI PRICE

$9.95 + $4.95 Shipping & handling


XTERRA COVER

XTERRA COVER

MSRP $18.95

NWI PRICE

$14.95 + $4.95 Shipping & handling

 

 

 

                                  

 
 
 
 

                                                                                                                                 

 

 

 

 

EMAIL  nwidetectors@yahoo.com 

 

NWI METAL DETECTORS

VALPARAISO, INDIANA